La T hop-up CNC in alluminio ME Sport è stata realizzata con precisione per migliorare la precisione e garantire una tenuta d'aria costante per Tokyo Marui (incluSI KRYTAC e KWA) serie AR15 M4 / M16 standard.
L'unità Hopup Chamber ME è di tipo rotativo, inoltre ha riprogettato le leve hop up e alte parti per lavorare al meglio con R-hop e Standard-Hop per mantenere la traiettoria di sparo dritta e accurata su ogni singolo colpo.
La t hop up ME è progettata per essere compatibile con la lunghezza dello spingi pallino da 21,00 mm a 21,25 mm, e pienamente compatibile con la maggior parte dei gommini hop up sia i più rinomati che aftermarket senza perdere FPS o far cadere BB a 20 metri dalla volata.
La t- hop up è dotata di un nuovo design a C-Clip di bloccaggio Delrin CNC per tenere stretta la canna senza farla oscillare o torcere, e 3 molle di compressione sulla parte superiore, inferiore e al centro dell'alloggiamento per garantire che l'unità hopup sia esattamente centrata, diritta e ermetica in ogni momento se adattata a qualsiasi gear V2 con foro interno da 11 mm o 11,5 mm.


*** Risultati del test: FPS potrebbe essere aumentato dal 5% al ​​10%. Per favore controlla i tuoi FPS!

Includes
	1 x CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit
	2 x Strong Clear Vinyl Cover set
	1 x CNC Aluminum Standard-Hop Arm
	1 x CNC Aluminum R-Hop Arm
	1 x Silicone Rubber Standard-Hop Nub Damper
	1 x Silicone Rubber R-Hop Nub Damper
	1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
	1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
	1 x CNC Brass Threaded Slot Pin
	1 x CNC Delrin Locking C-Clip
	1 x CNC Barrel Brass Spacer
	1 x Brass Spacer Holder Oring
	3 x Steel Compression Spring

 

Specification

	Overall Length: 51mm
	Overall Height: 37.75mm
	Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
	Hub Outer Diameter (to fit into Outer Barrel): min 12mm
	Hub Inner Diameter (to fit Nozzle): max 8.3mm
	Feeder Outer Diameter (to fit magazine): min 9.25mm
	Feeder Length (to fit magazine): max 6.25mm
	Material: Aluminum 6061

 

	Features
	Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
	Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series
	Precision rotary dial design for fine hopup adjustments
	Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
	Removable Brass Threaded Slot Pin for setup and maintenance
	Accepted the nozzle length from 21.00mm to 21.25mm
	Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
	Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
	Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
	Compatible with any V2 gear boxes with 11mm or 11.5mm bore
	Specially designed with BB Catching System to prevent dropping BBs after removing the magazine
	The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set to glow BBs in the dark ready!
	The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

	Weight
	N/A grams

 

	Usage
	Compatible with most Tokyo Marui (include KRYTAC and KWA) M4/M16 standard AEG version 2 gear box

 

	Requires
	Wearing eye protection is recommended
	Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
	Bearing lubricant oil/grease is recommended for smooth operation

 

	Instruction
	Instruction Manuals are included

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd.
KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries.
KWA® is a registered trademark of KWA Performance Industries, Inc.